Hyundai Genesis: General Information / General Tightening Torque Table

Tightening Torque Table of Standard Parts
BOLT (Nominal diameter)
NUT (Nominal diameter)


BOLT/NUT Thin screw
Torque Nm (kg.m, Ib-ft)

Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

M5
0.8 (0.031)
2.0 ~ 3.0 (0.2 ~ 0.3, 1.4 ~ 2.2)
4.9 ~ 6.9 (0.5 ~ 0.7, 3.6 ~ 5.1)
7.8 ~ 10.8 (0.8 ~ 1.1, 5.8 ~ 8.0)
M6
1 (0.039)
2.9 ~ 4.9 (0.3 ~ 0.5, 2.2 ~ 3.6)  
8.8 ~ 12.7 (0.9 ~ 1.3, 6.5 ~ 9.4)  
13.7 ~ 18.6 (1.4 ~ 1.9, 10.1 ~ 13.7)
M8
1.25 (0.049)
8.8 ~ 11.8 (0.9 ~ 1.2, 6.5 ~ 8.7)
22.6 ~ 30.4 (2.3 ~ 3.1, 16.6 ~ 22.4)  
33.3 ~ 44.1 (3.4 ~ 4.5, 24.6 ~ 32.5)
M10
1.5 (0.059)
16.7 ~ 22.6 (1.7 ~ 2.3, 12.3 ~ 16.6)
45.1 ~ 60.8 (4.6 ~ 6.2, 33.3 ~ 44.8)
65.7 ~ 88.3 (6.7 ~ 9.0, 48.5 ~ 65.1)
M12
1.75 (0.068)
29.4 ~ 39.2 (3.0 ~ 4.0, 21.7 ~ 28.9)
78.5 ~ 105.9 (8.0 ~ 10.8, 57.9 ~ 78.1)
114.7 ~ 154.9 (11.7 ~ 15.8, 84.6 ~ 114.3)
M14
2 (0.078)
47.1 ~ 63.7 (4.8 ~ 6.5, 34.7 ~ 47.0)
125.5 ~ 169.7 (12.8 ~ 17.3, 92.6 ~ 125.1)
183.4 ~ 249.1 (18.7 ~ 25.4, 135.3 ~ 183.7)
M16
2 (0.078)
73.5 ~ 100.0 (7.5 ~ 10.2, 54.2 ~ 73.8)
197.1 ~ 266.7 (20.1 ~ 27.2, 145.4 ~ 196.7)
288.3 ~ 390.3 (29.4 ~ 39.8, 212.7 ~ 287.9)
M20
2.5 (0.098)
144.2 ~ 195.2 (14.7 ~ 19.9, 106.3 ~ 143.9)
396.2 ~ 535.4 (40.4 ~ 54.6, 292.2 ~ 394.9)
565.8 ~ 764.9 (57.7 ~ 78.0, 417.3 ~ 564.2)
M24
3 (0.118)
249.1 ~ 337.3 (25.4 ~ 34.4, 183.7 ~ 248.8)
687.4 ~ 929.7 (70.1 ~ 94.8, 507.0 ~ 685.7)
975.8 ~ 1320.0 (99.5 ~ 134.6, 719.7 ~ 973.6)
M30
3.5 (0.137)
499.2 ~ 674.7 (50.9 ~ 68.8, 368.2 ~ 497.6)
1372.9 ~ 1858.4 (140.0 ~ 189.5, 1012.6 ~ 1370.7)
1956.4 ~ 2647.8 (199.5 ~ 270.0, 1443.0 ~ 1952.9)

BOLT/NUT Thin screw
Torque Nm (kg.m, Ib-ft)
Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

M5
0.5 (0.019)
2.0 ~ 3.0 (0.2 ~ 0.3, 1.4 ~ 2.2)
5.9 ~ 8.8 (0.6 ~ 0.9, 4.3 ~ 6.5)
8.8 ~ 12.7 (0.9 ~ 1.3, 6.5 ~ 9.4)
M6
0.75 (0.029)
3.9 ~ 4.9 (0.4 ~ 0.5, 2.9 ~ 3.6)
9.8 ~ 13.7 (1.0 ~ 1.4, 7.2 ~ 10.1)
14.7 ~ 20.6 (1.5 ~ 2.1, 10.8 ~ 15.2)
M8
1 (0.039)
8.8 ~ 11.8 (0.9 ~ 1.2, 6.5 ~ 8.7)
24.5 ~ 32.4 (2.5 ~ 3.3, 18.1 ~ 23.9)
35.3 ~ 48.1 (3.6 ~ 4.9, 26.0 ~ 35.4)
M10
1.25 (0.049)
17.7 ~ 23.5 (1.8 ~ 2.4, 13.0 ~ 17.4)
47.1 ~ 63.7 (4.8 ~ 6.5, 34.7 ~ 47.0)
69.6 ~ 94.1 (7.1 ~ 9.6, 51.4 ~ 69.4)
M12
1.25 (0.049)
32.4 ~ 44.1 (3.3 ~ 4.5, 23.9 ~ 32.5)
86.3 ~ 117.7 (8.8 ~ 12.0, 63.7 ~ 86.8)
127.5 ~ 172.6 (13.0 ~ 17.6, 94.0 ~ 127.3)
M14
1.5 (0.059)
51.0 ~ 69.6 (5.2 ~ 7.1, 37.6 ~ 51.4)
136.3 ~ 185.3 (13.9 ~ 18.9, 100.5 ~ 136.7)
201.0 ~ 271.6 (20.5 ~ 27.7, 148.3 ~ 200.4)
M16
1.5 (0.059)
79.4 ~ 107.9 (8.1 ~ 11.0, 58.6 ~ 79.6)
211.8 ~ 286.4 (21.6 ~ 29.2, 156.2 ~ 211.2)
311.8 ~ 421.7 (31.8 ~ 43.0, 230.0 ~ 311.0)
M20
1.5 (0.059)
163.8 ~ 221.6 (16.7 ~ 22.6, 120.8 ~ 163.5)
448.2 ~ 607.0 (45.7 ~ 61.9, 330.5 ~ 447.7)
639.4 ~ 864.9 (65.2 ~ 88.2, 471.6 ~ 638.0)
M24
2 (0.078)
276.5 ~ 373.6 (28.2 ~ 38.1, 204.0 ~ 275.6)
759.0 ~ 1026.8 (77.4 ~ 104.7, 559.8 ~ 757.3)
1080.7 ~ 1462.2 (110.2 ~ 149.1, 797.1 ~ 1078.4)
M30
2 (0.078)
562.9 ~ 762.0 (57.4 ~ 77.7, 415.2 ~ 562.0)
1553.4 ~ 2102.5 (158.4 ~ 214.4, 1145.7 ~ 1550.8)
2210.4 ~ 2991.0 (225.4 ~ 305.0, 1630.3 ~ 2206.1)

Flange BOLT (Nominal diameter)
Flange NUT (Nominal diameter)


Flange BOLT/NUT Normal screw
Torque Nm (kg.m, Ib-ft)
Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

M5
0.8 (0.031)
2.0 ~ 2.9 (0.2 ~ 0.3, 1.4 ~ 2.2)
5.9 ~ 7.8 (0.6 ~ 0.8, 4.3 ~ 5.8)
8.8 ~ 11.8 (0.9 ~ 1.2, 6.5 ~ 8.7)
M6
1 (0.039)
3.9 ~ 4.9 (0.4 ~ 0.5, 2.9 ~ 3.6)
9.8 ~ 13.7 (1.0 ~ 1.4, 7.2 ~ 10.1)
14.7 ~ 19.6 (1.5 ~ 2.0, 10.8 ~ 14.5)
M8
1.25 (0.049)
8.8 ~ 11.8 (0.9 ~ 1.2, 6.5 ~ 8.7)
24.5 ~ 32.4 (2.5 ~ 3.3, 18.1 ~ 23.9)
35.3 ~ 48.1 (3.6 ~ 4.9, 26.0 ~ 35.4)
M10
1.5 (0.059)
17.7 ~ 24.5 (1.8 ~ 2.5, 13.0 ~ 18.1)
48.1 ~ 65.7 (4.9 ~ 6.7, 35.4 ~ 48.5)
70.6 ~ 96.1 (7.2 ~ 9.8, 52.1 ~ 70.9)
M12
1.75 (0.068)
31.4 ~ 43.1 (3.2 ~ 4.4, 23.1 ~ 31.8)
84.3 ~ 113.8 (8.6 ~ 11.6, 62.2 ~ 83.9)
123.6 ~ 167.7 (12.6 ~ 17.1, 91.1 ~ 123.7)
M14
2 (0.078)
51.0 ~ 68.6 (5.2 ~ 7.0, 37.6 ~ 50.6)
135.3 ~ 182.4 (13.8 ~ 18.6, 99.8 ~ 134.5)
198.1 ~ 268.7 (20.2 ~ 27.4, 146.1 ~ 198.2)
M16
2 (0.078)
79.4 ~ 107.9 (8.1 ~ 11.0, 58.6 ~ 79.6)
212.8 ~ 288.3 (21.7 ~ 29.4, 157.0 ~ 212.7)
311.8 ~ 421.7 (31.8 ~ 43.0, 230.0 ~ 311.0)

Flange BOLT/NUT Thin screw
Torque Nm (kg.m, Ib-ft)

Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

M5
0.5 (0.019)
2.9 ~ 2.9 (0.3 ~ 0.3, 2.2 ~ 2.2)
6.9 ~ 8.8 (0.7 ~ 0.9, 5.1 ~ 6.5)
9.8 ~ 13.7 (1.0 ~ 1.4, 7.2 ~ 10.1)
M6
0.75 (0.029)
3.9 ~ 5.9 (0.4 ~ 0.6, 2.9 ~ 4.3)
10.8 ~ 14.7 (1.1 ~ 1.5, 8.0 ~ 10.8)
16.7 ~ 21.6 (1.7 ~ 2.2, 12.3 ~ 15.9)
M8
1 (0.039)
9.8 ~ 12.7 (1.0 ~ 1.3, 7.2 ~ 9.4)
26.5 ~ 35.3 (2.7 ~ 3.6, 19.5 ~ 26.0)
38.2 ~ 52.0 (3.9 ~ 5.3, 28.2 ~ 38.3)
M10
1.25 (0.049)
19.6 ~ 25.5 (2.0 ~ 2.6, 14.5 ~ 18.8)
51.0 ~ 68.6 (5.2 ~ 7.0, 37.6 ~ 50.6)
75.5 ~ 102.0 (7.7 ~ 10.4, 55.7 ~ 75.2)
M12
1.25 (0.049)
35.3 ~ 48.1 (3.6 ~ 4.9, 26.0 ~ 35.4)
94.1 ~ 126.5 (9.6 ~ 12.9, 69.4 ~ 93.3)
138.3 ~ 186.3 (14.1 ~ 19.0, 102.0 ~ 137.4)
M14
1.5 (0.059)
55.9 ~ 75.5 (5.7 ~ 7.7, 41.2 ~ 55.7)
148.1 ~ 200.1 (15.1 ~ 20.4, 109.2 ~ 147.6)
216.7 ~ 293.2 (22.1 ~ 29.9, 159.8 ~ 216.3)
M16
1.5 (0.059)
86.3 ~ 116.7 (8.8 ~ 11.9, 63.7 ~ 86.1)
229.5 ~ 309.9 (23.4 ~ 31.6, 169.3 ~ 228.6)
336.4 ~ 455.0 (34.3 ~ 46.4, 248.1 ~ 335.6)

   
1.
The torques shown in the table are standard values under the following conditions.
Nuts and bolts are made of galvanized steel bar.
Galvanized plain steel washers are inserted.
All nuts, bolts and plain washers are dry.
2.
The torques shown in the table are not applicable.
When spring washers, toothed washers and the like are inserted.
If plastic parts are fastened.
If self-tapping screws or self-locking nuts are used.
If threads and surfaces are coated with oil.
Towing
Towing If the vehicle needs to be towed, call a professional towing service. It is very dangerous to tow a vehicle with just a rope or chain. Emergency Towing There are three popular metho ...

Basic Service Symbols
Basic Service Symbols There are five primary symbols used to complement illustrations. These symbols indicated the materials to be applied to parts during service. SymbolMeaningDo not reuse ...

Other information:

Hyundai Genesis (DH) 2013-2016 Owners Manual: Seat warmers and coolers (by air)


The seat warmers and coolers are provided to warm or cool the front seats by blowing air through small vent holes on the surface of the seat cushions and seatbacks. When the operation of the seat warmers or cooler are not needed, keep the switches in the OFF position. While the engin ...

Hyundai Genesis (DH) 2013-2016 Service Manual: Occupant Classification System(OCS) Description and Operation


Description In order to make normal activation of airbag system, SRSCM detects DTC(s) for the Occupant Classification System (OCS). If the seat is occupied, OCS detects passenger presences status and send signal to SRSCM via CAN. SRSCM recognizes the signal as 2(two) different classifica ...

© 2013-2024 www.hgenesisdh.com