Other information:
Inspection
Power Seat Motor
1.
Disconnect the connectors for each motor.
2.
When the battery power is supplied to the motor connector, check the motor for smooth operation.
3.
Reverse the connections and check that the motor turns in reverse.
4.
If the motor runs abnormally, replac ...
Inspection
1.
Check the signal waveform of the CMPS and CKPS using the GDS.
Specification: Refer to “Wave Form”
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the crankshaft position sensor connector (A).
3.
Remove the ...