Hyundai Genesis: Front Seat / Front Seat Shield Inner Cover Repair procedures

Replacement

• Put on gloves to prevent hand injuries.

• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • When removing the interior trim pieces, use a plastic panel removal tool not to damage the surface. • Take care not to bend or scratch the trim and panels.

1.	Remove the front seat assembly. (Refer to Front Seat - "Front Seat Assembly")

2.	Using a screwdriver or remover, remove the front seat shield inner cover (A).

3.	Install in the reverse order of removal. • Replace any damaged clips.

Front Seat Shield Inner Cover Components and Components Location

Component Location 1. Front seat shield inner cover ...

Front Seat Back Cover Components and Components Location

Component Location 1. Front seat back cover ...

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: Cowl Cross Bar Assembly Components and Components Location

Component Location 1. Cowl cross bar assembly ...

Hyundai Genesis (DH) 2013-2016 Service Manual: Trailing Arm Repair procedures

Removal 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from the rear hub. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)     Be careful not to damage the ...