Hyundai Genesis (DH): Emission Control System / Exhaust Emission Control System
- Description and Operation
- Catalytic Converter Description and Operation
- Catalytic Converter Repair procedures
- CVVT (Continuously Variable Valve Timing) System Description and Operation
Replacement 1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the canister assembly. (Refer to Evaporative Emission Control System - "Canister") 3.
Description The amount of exhaust emissions (CO, HC, NOx) is controlled by a combination of engine modifications and special control components. The basic system control is composed of the combustion chamber, intake manifold, camshaft and ignition system.
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Description and Operation
Description BSD is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached to the rear bumper, and detects any vehicle within the blind spot zone and gives off alarm (visual and auditory).
Hyundai Genesis (DH) 2013-2016 Service Manual: Mode Control Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4. Verify that the mode control actuator operates to the vent mode when connected in reverse.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Heating, Ventilation and Air Conditioning
- Starter Repair procedures
- Front Door
- New on site
- Most important about car
