Hyundai Genesis: Air Conditioning System / Evaporator Temperature Sensor Description and Operation

Description
The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing due to excessive cooling.

A/C Pressure Transducer Repair procedures
Inspection 1. Measure the pressure of high pressure line by measuring voltage output between terminal “1” and “2”. 2. Inspect the voltage value whether it is the regular value or not. ...

Evaporator Temperature Sensor Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure the resistance between terminal “+” and “-” of the evaporator temp ...

Other information:

Hyundai Genesis (DH) 2013-2016 Owners Manual: Resetting the driver's seat memory system


Take the following procedures to reset the driver's seat memory system, when it does not operate properly. To reset the driver's seat memory system 1. Press the Engine Start/Stop button to the ON position, set the gear in P (Park), and open the driver's door. 2. Operate the control ...

Hyundai Genesis (DH) 2013-2016 Owners Manual: Emission control system


The emission control system of your vehicle is covered by a written limited warranty. Please see the warranty information contained in the Owner’s Handbook & Warranty Information booklet in your vehicle. Your vehicle is equipped with an emission control system to meet all applic ...

© 2013-2024 www.hgenesisdh.com