Hyundai Genesis (DH): General Information / Specifications

Hyundai Genesis (DH) 2013-2016 Service Manual / Restraint / General Information / Specifications

Tightening Torques
Item
N.m
kgf.m
lb-ft
Passenger airbag (PAB)
7.8 ~ 11.8
0.8 ~ 1.2
5.8 ~ 8.7
Side airbag (SAB)
6.9 ~ 8.8
0.7 ~ 0.9
5.1 ~ 6.5
Curtain airbag (CAB)
11.8 ~ 14.7
1.2 ~ 1.5
8.7 ~ 10.9
Knee airbag (KAB)
7.0 ~ 11.0
0.7 ~ 1.2
5.2 ~ 8.1
Seat belt anchor bolt (BPT)
39.2 ~ 53.9
4.0 ~ 5.5
28.9 ~ 39.8
SRS control module (SRSCM)
7.8 ~ 10.8
0.8 ~ 1.1
5.8 ~ 8.0
Front impact sensor (FIS) mounting nut
7.8 ~ 10.8
0.8 ~ 1.0
5.8 ~ 7.2
Front side impact sensor (FSIS) mounting screw
3.0 ~ 4.0
0.3 ~ 0.4
2.21 ~ 2.95
Rear side impact sensor (RSIS) mounting bolt
7.8 ~ 11.8
0.8 ~ 1.2
5.8 ~ 8.7

    General The supplemental restraint system (SRS) is designed to supplement the seat belt to help reduce the risk or severity of injury to the driver and passenger by activating and deploying the driver, passenger, side airbag and belt pretensioner in certain frontal or side collisions.

    Special Service Tools Tool(Number and Name)IllustrationUseDeployment tool0957A-34100AAirbag deployment tool.Deployment adapter0957A-3F100Use with deployment tool.

    Other information:

    Hyundai Genesis (DH) 2013-2016 Service Manual: Rheostat Repair procedures

    Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the lower crash pad switch assembly (A) after disengaging the mounting clip. 4. Remove the rheostat switch connector (A).

    Hyundai Genesis (DH) 2013-2016 Service Manual: High Mounted Stop Lamp Repair procedures

    Removal High Mounted Stop Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the roof trim assembly. (Refer to Body - "Roof Trim") 3. Remove the high mounted stop lamp assembly (A) after loosening the mounting screws. Installation 1.

    Categories

     
    Copyright В© 2026 www.hgenesisdh.com - 0.0248