Hyundai Genesis: Towing / Removable towing hook
![](images/removable_towing_hook-1469/1172/pages.57(4).jpg)
1.Open the trunk, and remove the
towing hook from the tool case.
2.Remove the hole cover pressing
the lower part of the cover on the
bumper.
3.Install the towing hook by turning it
clockwise into the hole until it is
fully secured.
4.Remove the towing hook and
install the cover after use.
Towing service
If emergency towing is necessary,
we recommend having it done by an
authorized HYUNDAI dealer or a
commercial tow-truck service.
Proper lifting and towing procedures
are ne ...
If towing is necessary, we recommend
you to have it done by an
authorized HYUNDAI dealer or a
commercial tow truck service.
If towing service is not available in an
emergency, your vehicle ...
Other information:
Removal
Front Seat
1.
Disconnect the battery (-)terminals.
2.
Remove the floor console upper cover.
(Refer to Body - "Floor Console Assembly")
3.
Disconnect the connecter and screw and remove the seat heater switch assembly (A).
Rear Seat Armrest Switch
1.
Disconnect the negative ...
Replacement
•
Put on gloves to prevent hand injuries.
•
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
•
When removing the interior trim pieces, use a p ...