Hyundai Genesis: Rear Seat Belt / Rear Center Seat Belt Retractor Repair procedures
• |
When installing the belt, make sure not to damage the retractor. |
|
1. |
Remove the rear package tray trim.
(Refer to Interior Trim - "Rear Package Tray Trim") |
2. |
Remove the rear curtain assembly.
(Refer to Body Electrical System - "Rear Curtain") |
3. |
Remove the rear package tray cushion (A). |
4. |
After loosening the retractor (A) mounting bolt, remove the rear center seat belt (B).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
|
|
5. |
Install in the reverse order of removal.
• |
Make sure the connector is connected in properly. |
• |
Replace any damaged clips. |
|
|
Component Location
1. Rear center seat belt retractor
...
Component Location
1. Rear seat belt buckle [RH]2. Rear seat belt buckle [LH]
...
Other information:
Components Location
[Vehicle Components]
1. Transmission Control Module(TCM)2. Injector Driver Box(IDB)3. Engine Control Module(ECM)4. Shift lever5. Date Link Connector (DLC)
[Transmission Components]
1. Input speed sensor2. Middle speed sensor3. Output speed sensor4. E Module assemb ...
Component Location
1. Rear door trim
...