| Description |
| B/A State | Description | ||
| DISARM |
Component Location 1. Burglar horn2. BCM3. Door lock / unlock buzzer4. Front door lock actuator & switch5. Rear door lock actuator &switch6. Inspection In case of working on the non-gloss timber trimming, special care shall be given to the following. Other information:Hyundai Genesis (DH) 2013-2016 Service Manual: Receiver-Drier Repair proceduresReplacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with the L wrench (A). Tightening torque : 9.81 ~ 14.71 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) 3. Remove the receiver-drier (A) from condenser using a long nose plier. Hyundai Genesis (DH) 2013-2016 Service Manual: Temperature Control Actuator Repair proceduresInspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the temperature control actuator operates to the warm (Driver's side) or cool (Passenger's side) position when connecting 12V to terminal 3 and grounding terminal 4. Categories
Copyright В© 2026 www.hgenesisdh.com - 0.0241
|