Other information:
Inspection
1.
Check the signal waveform of the CMPS and CKPS using the GDS.
Specification: Refer to “Wave Form”
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the crankshaft position sensor connector (A).
3.
Remove the ...
Replacement
1.
Turn the ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the canister assembly.
(Refer to Evaporative Emission Control System - "Canister")
3.
Loosen the installing bolt (A).
4.
Remove the fuel tank air filter after disconnecting the vap ...