Hyundai Genesis: Interior features / Cup holder

Front

To open the cover:

Press the cover and it will slowly open.

Rear

To open the cover:

Pull up the cover.

WARNING

• Avoid abrupt starting and braking when the cup holder is in use to prevent spilling your drink. If hot liquid spills, you could be burned. Such a burn to the driver could cause loss of vehicle control resulting in an accident.
• Do not place uncovered or unsecured cups, bottles, cans, etc., in the cup holder containing hot liquid while the vehicle is in motion. Injuries may result in the event of sudden stop or collision.
• Only use soft cups in the cup holders. Hard objects can injure you in an accident.

WARNING

Keep cans or bottles out of direct sun light and do not put them in a hot vehicle. It may explode.

CAUTION

• Keep your drinks sealed while driving to prevent spilling your drink. If liquid spills, it may get into the vehicle's electrical/electronic system and damage electrical/electronic parts.
• When cleaning spilled liquids, do not dry the cup holder at high temperature. This may damage the chrome part of the cup holder.

Interior features

...

Sunvisor

To use a sunvisor, pull it downward. To use a sunvisor for a side window, pull it downward, unsnap it from the bracket (1) and swing it to the side (2). To use the vanity mirror, pull down the ...

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: Repair procedures

Inspection [System Inspection] 1. Disconnect the vapor hose from the throttle body and connect a vacuum pump to the nipple on the throttle body. 2. Using the vacuum pump, check the following items by applying vacuum. • At Cold Engine [Engine Coolant Temperature < 60°C(140°F)] En ...

Hyundai Genesis (DH) 2013-2016 Service Manual: ETC (Electronic Throttle Control) System Repair procedures

Inspection If idle rpm is unstable or engine stops, check the ETC module operation with GDS diagnostic tool. And if necessary, clean carbon in the throttle body. 1. Connect the GDS to the Data Link Connector (DLC). 2. Select "Vehicle S/W management" > "Inspection / Test" > "ETC Performan ...