Hyundai Genesis: Tire Pressure Monitoring System (TPMS) / Check tire pressure
- You can check the tire pressure in
the Information Mode on the cluster.
- Tire pressure is displayed 1~2 minutes
after driving.
- If tire pressure is not displayed
when the vehicle is stopped, “Drive
to display” message will appear.
After driving, check the tire pressure.
- The displayed tire pressure values
may differ from those measured
with a tire pressure gauge.
- You can change the tire pressure
unit in the User Settings Mode on
the cluster.
- psi, kpa, bar
(1) Low Tire Pressure Telltale/
TPMS Malfunction Indicator
(2) Low Tire Pressure Position
Telltale and Tire Pressure Telltale
(Shown on the LCD display) ...
Each tire, including the spare (if provided),
should be checked monthly
when cold and inflated to the inflation
pressure recommended by the vehicle
manufacturer on the vehicle placard
or tir ...
Other information:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Separate the room lamp (B) from the roof trim after disengaging the mounting clip (A).
3.
Separate the makeup lamp (B) from the roof trim after disengaging the mounting clip (A).
Installation
1.
Install the lamp assembly af ...
Removal
[4WD]
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the front wheel and tire (A) from the front hub.
Tightening torque :
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
3.
Remove the wheel speed sensor bracket bolt (A) & wh ...