Other information:
Removal
1.
Turn ignition switch off and disconnect the battery (-) cable from the battery
2.
Remove the driver side crash pad side cover.
(Refer to Body - "Crash Pad")
3.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad")
4.
Remove the EPB switch after removing 4 scr ...
Inspection with GDS
Initialization and diagnosis sequence by using GDS equipment.
The following is the summarized A/S procedure.
NoProcedure1Park the vehicle on level ground2Tire check3IGN1 ON4Head lamp Low Beam ON5Connection with diagnostic tool6Initial command by diagnostic tool7Clear DTC C ...