Hyundai Genesis: Tires and wheels / Tire care

For proper maintenance, safety, and maximum fuel economy, you must always maintain recommended tire inflation pressures and stay within the load limits and weight distribution recommended for your vehicle.

All specifications (sizes and pressures) can be found on a label attached to the driver’s side center pillar

Tires and wheels
WARNING Tire failure may cause loss of vehicle control resulting in an accident. To reduce risk of SERIOUS INJURY or DEATH, take the following precautions: Inspect your tires monthly for ...

Recommended cold tire inflation pressures
All tire pressures (including the spare) should be checked when the tires are cold. “Cold tires” means the vehicle has not been driven for at least three hours or driven less than one mi ...

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: 8LR Brake Control Solenoid Valve Repair procedures


Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between solenoid valve terminals. 4. Check that the resistance is within the specification. ...

Hyundai Genesis (DH) 2013-2016 Service Manual: SRS Control Module (SRSCM) Repair procedures


Removal 1. Turn the engine OFF. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 3. Remove the floor console assembly. (Refer to Body - "Floor Console Assembly") 4. Pull up the lock of the SRSCM connector to disconnect the connector ...

© 2013-2022 www.hgenesisdh.com