Hyundai Genesis: Engine Control System / Purge Control Solenoid Valve (PCSV) Specifications

Specification
Item
Specification
Coil Resistance (?)
22.0 ~ 26.0 [20°C(68°F)]

Purge Control Solenoid Valve (PCSV) Description and Operation
Description Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when the ...

Purge Control Solenoid Valve (PCSV) Schematic Diagrams
Circuit Diagram ...

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: Knee Airbag (KAB) Module Repair procedures


Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the Mounting nuts (A). 4. Remove the srcrews(A)and Connector (B). 5. Push the cli ...

Hyundai Genesis (DH) 2013-2016 Service Manual: Ambient Temperature Sensor Description and Operation


Description The ambient temperature sensor is located inside the side mirror and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature. The sensor output will be used for discharge temperatur ...

© 2013-2021 www.hgenesisdh.com